602-448-6266 (M-F)

AK-47 BARREL THREAD ADAPTERS / BUSHINGS

AK-47 CENTURY ARMS C39, C39 V2 & RAS47 PISTOL PARTS AND UPGRADES

AK-47 GRIPS

AK-47 MAGAZINES AND DRUMS

AK-47 MUZZLE BRAKES, BARREL EXTENSIONS & CRUSH WASHERS

AK-47 PAP M70/M92/M85 NP/YUGO / CENTURY ARMS / ZASTAVA PISTOL UPGRADES

AK-47 UNIVERSAL, & CHIAPPA AK47 PISTOLS-UPGRADES

AK-47, DRACO, MINI DRACO & AK-74 PARTS

AK47 ARSENAL SAM 7K PISTOL UPGRADES

AR-15 PARTS, MUZZLE BRAKES & ACCESSORIES

AR-15, AR-10, & MINI14 MAGAZINES

AR10 PARTS, MAGS AND ACCESSORIES for (5/8x24) Threads

BARREL THREADING OPTIONS FOR KEL TEC, PARTS & UPGRADES

BARREL THREADING, PINNING AND CROWNING, & RECEIVER THREADING SERVICES

BIPODS & BRASS CATCHERS

BOOKS, CONVERSION MANUALS, AND PROSPECTIVE FFL MANUALS

COBRAY 37MM FLARE LAUNCHERS & RAIL MOUNTS

COMPLIANT 10 ROUND MAGAZINES

CZ SKORPION 9MM UPGRADES AND ADAPTERS

DESERT EAGLE EXTRAS

FAKE SUPPRESSORS/FAKE SILENCERS

FOLDING ADAPTERS

GLOCK AND OTHER PISTOLS MAGAZINES & PARTS

GRIPS AND FOREGRIPS

GUN CASES & RANGE BAGS

GUNS FOR SALE

M-11 9MM SMG REPLACEMENT PARTS

M-11 9MM SMG UPGRADES

M-11 COBRAY SWD SEMI AUTO PARTS AND UPGRADES

M-12, M-11A1 SMG & SA .380 PARTS

MAC-10 SMG UPGRADES

MAC-10 SMG/OPEN BOLT REPLACEMENT PARTS

MAGAZINE POUCHES & BELTS

MAGAZINE SPEED LOADERS

MAGAZINE SPRINGS & MAGAZINE PARTS

MAGAZINES & DRUMS FOR .45 acp 1911 STYLE PISTOLS AND BERETTA 9MM

MAGAZINES & DRUMS FOR PPSh-41, M1 CARBINE, RUGER 10/22 & MSAR STG-556

MAGAZINES & DRUMS FOR STEN, MP44, SUOMI, & H & K

MAGAZINES FOR ALL M-11 Cobray SWD 9MM, SMG & SEMI AUTO

MAGAZINES FOR ALL MAC-10 .45 ACP SMG & SA, MASTERPIECE ARMS .45 ACP, VULCAN .45 ACP.

MAGAZINES FOR ALL MPA MASTERPIECE ARMS, STEN & VELOCITY 9MM PISTOLS & RIFLES

MAGAZINES FOR M11A1 .380 ACP & M12 .380 ACP

MAGAZINES FOR MAC-10 9MM SMG & SEMI AUTO

MAGAZINES, DRUMS, AND PARTS FOR FN/FAL, SKS, M1A/M14, & THOMPSON

MASTER PIECE ARMS All 9MM & MINI SERIES - REPLACEMENT PARTS

MASTER PIECE ARMS MPA22-T UPGRADES

MASTERPIECE ARMS .45 ACP, VULCAN/VELOCITY .45 ACP & MAC-10 SEMI AUTO PARTS and UPGRADES

MASTERPIECE ARMS ALL 9MM, MINI SERIES & 5.7x28mm SERIES - UPGRADES

REAR BUTTSTOCKS & REAR STOCKS

RED DOT SCOPES, LASERS, FLIP UP SIGHTS, & FLASHLIGHTS

SAIGA SHOTGUN PARTS, SAIGA 7.62X39, MAGS, DRUMS, & UPGRADES

SALE ITEMS

SHOCKWAVE BLADES, ATF APPROVED ARM BRACES, BUFFER TUBES & SIDE FOLDING ADAPTERS

SHOTGUN UPGRADES-REMINGTON, & MOSSBURG

SIG SAUER MAGAZINES & PARTS

SLINGS, SLING LOOPS AND RAILS

SUPPRESSORS

T-SHIRTS & LICENSE PLATE FRAMES

TEC-9, TEC-22, KG 99 & AB-10, MAGAZINES & PARTS-SEMI AUTO & SMG

THREAD ADAPTERS

THREAD PROTECTORS

TOOLS & THREAD TAPS FOR M-11, MAC-10, MPA, AR-15, & AK-47

UZI, UZI .22 LR, HK, & MAGAZINES

WALTHER MAGAZINES, PARTS & AUCTIONS

Please research all ATF rules and regulations before purchasing any pistol rear stock adapters.

Billet Stock and Adapter for ALL Master Piece Arms 9mm

Details 

This is our newest rear stock design and adapter for the Master Piece Arms Semi Auto 9mm guns and rifles. It offers a solid stock design and with the adapter weighs just over 1 lb. It measures 8.75" from the rear of the receiver. Finished in jet black oxide with a threaded swivel hole on the top rear of the stock.It bolts to your gun and maintains a tight precision fit under rapid fire. Instructions and Allen wrench included. This part number fits all MPA 9mm Semi Auto only. NFA rules apply. (gun & other parts sold separately) **NEW VERSION OF THIS STOCK IN THE LAST FEW PHOTOS*
Price: $149.98

Blackout Barrel Extension for MPA Mini (1/2 x 28)

Details 

This machined 7 inch Barrel extension takes its looks from the Browning 1919 machine gun barrel. It is threaded for the MPA 930 mini series in 9mm. It provides more accuracy and gives your weapon a more tactical look. It also acts as a counter weight and aids to keep the muzzle down under rapid fire. With 9 machined ports at the end, it acts as a muzzle break as well. Fits standard mini threads of 1/2x28. It's a great upgrade that works well with our forward tactical grips and rear AR stock adapters. (gun & other parts sold separately)weighs about 14.5 ounces ***NEW FLAT/MATTE BLACK FINISH
Price: $59.99

Double Threaded Barrel for MPA & M-11 9mm (1/2X28 AND 3/4X10)

Details 

If you want the versatility of a standard 3/4x10 9mm thread and also want a 1/2x28 thread, then this is the barrel for you. It offers machined 1/2x28 threads on a standard 9mm barrel so you can thread on suppressors and muzzle brakes. It is a new barrel with both threads. (Upper sold separately) Fits M-11 SMG, Semi Auto and MPA mid sized 9mm. ***Does not fit MPA Mini 930.***
Price: $129.99

Forward Tri Rail Mount for MPA Mid Sized 9mm & 5.7x28mm

Details 

This NEW forward Mount for the MPA mid sized M-11 pistol. It has three short rails to add any components you want. You can add a lower grip, a laser on the sides, a flashlight or other components. You can also add grip covers to all three rails to give it a soft tactical grip. Our new mount fits over the barrel and has a thickness equal to the exterior base of the barrel allowing all the barrel threads to be used for a suppressor, muzzle brake, flash hider, our Blackout Barrel Extension. The mount is held around the barrel by 3 set screws and allows access to the receiver pins. Finished in jet black anodize. Includes mount, Allen wrench, and three polymer rails. ***Does NOT fit MPA mini 930 pistol
Price: $78.98

Handguards with Rails for MPA & Mac

Details 

If you have a 10" or 16" barreled upper for your Mac or MPA in 9mm or .45 acp and want to add some accessories, then this is for you! It offers three picatinny polymer rails, one underneath for your choice of AR type slide on grip, and two rails on the upper sides of the hand guards for a laser and flashlight. Just remove your current AR hand guards and install our two piece set, tighten down the threaded cap and your gun is ready. Includes: two polymer hand guards with three polymer picatinny rails. (gun & other parts sold separately) Please call with any questions. Does not fit MPA Mini 930 pistol.
Price: $69.99

High Rise Bolt Handle for Master Piece Arms 9mm

Details 

High Rise bolt handle for the Master Piece Arms 9mm Semi Auto. Replaces the stock thin cocking knob with an easier to grab high rise handle. It is notched to lock in place and can easily be turned for free movement. (gun and other components sold separately)
Price: $22.99

Low Mount Fixed Stock for MPA Mini 930 9mm

Details 

This fixed stock is 10.25" long and attaches easily to the MPA Mini 930 9mm Semi auto guns that have a threaded hole on the underside rear of the gun. It offers a sturdy stock and helps with shooting accuracy while giving it a tactical look. Works great for competition as it offers the shooter a perfectly placed cheek well to use iron sights or a red dot scope mounted to one of our side cocker uppers. Please call if any questions. (gun & other components sold separately) Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers. This part number only fits MPA Mini 930 9mm that have a threaded hole on the underside rear of the gun.
Price: $59.99

M-11 Semi Auto Slotted Extension
Previous1 of 3Next

Details 

This well crafted 7 inch slotted Barrel extension for the M-11 9mm Semi Auto provides more accuracy and gives your weapon a more tactical look. Fits standard 3/4 x 10 threaded barrels, will not fit MPA mini pistol barrels unless our thread adapter is added. Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers.
Price: $69.99

Machined, Non Vented AR-15 Thread Protector for MPA Mini 930

Details 

This mini, machined thread protector, is nearly 1.75" inches in length and bored out to accommodate the 9mm rounds. It has cuts in it similar to an A1 muzzle brake but they are not cut through to the bore. Complete with AR crush washer to prevent it from unscrewing under fire. (gun and other parts sold separately)
Price: $28.99

Molded Polymer Grip for all MPA 9mm guns

Details 

This is a must have item if you hate the square uncomfortable grip on your standard gun. This two piece wrap around grip will make shooting a lot more comfortable and easier for longer periods of time. It does not replace stock grip but slides over it without making any permanent alterations. Works well with or without our quick drop magazine release lever for the M-11 with Sten conversion. If you are tired of the original square shaped hand grip then this is the remedy for you. (grip only, other components sold separately) This grip does not have the straight sides and has the expansion slots on both sides for the magazine ribs. Fits all Master Piece Arms 9mm guns, 30, 30T, 35, 35SST, & 20SST mid sized MPA guns & Mini 930. If you are using the NEW Tapco Magazines, the mag or grip edge may need to be trimmed to fit. Please see other part number for Mini pistol grip.
Price: $85.99

MPA 30, 35, &20SST (S, SST, T) Low Mount Fixed Stock

Details 

This fixed stock attaches easily to most MPA 9mm Semi auto mid sized guns. It offers a sturdy stock and helps with shooting accuracy while giving it a tactical look. It is priced low enough to replace the flimsy wire stock. Works great for competition as it offers the shooter a perfectly placed cheek well to use iron sights or a red dot scope mounted to one of our side cocker uppers. Please call if any questions. (gun & other components sold separately) Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers.
Price: $59.99

MPA Side Cocking Upper W/9mm Double Threaded Barreled

Details 

If you want the flexibility of having both threads of 3/4x10 and 1/2x28 on a side cocking M-11 upper with a scope rail mount, then this is the perfect set up. Barrel has been double threaded and pinned, just slide in your bolt assembly and you are ready to go. Fits M-11 9mm SMG, Semi Auto & MPA Mid sized M-11, does not fit MPA Mini 930.
Price: $239.98

« | 1 | 2 | 3 | 4 | »