602-448-6266 (M-F)

AK 47 CHIAPPA 9MM AND DRACO NAK 9MM PARTS

AK-47 BARREL THREAD ADAPTERS / BUSHINGS

AK-47 CENTURY ARMS C39, C39 V2 & RAS47 PISTOL PARTS AND UPGRADES

AK-47 GRIPS

AK-47 MAGAZINES AND DRUMS

AK-47 MUZZLE BRAKES, BARREL EXTENSIONS & CRUSH WASHERS

AK-47 PAP M70/M92/M85 NP/YUGO / CENTURY ARMS / ZASTAVA PISTOL UPGRADES

AK-47 UNIVERSAL STOCK ADAPTERS & SLING PLATES

AK-47, DRACO, MINI & MICRO DRACO & AK-74 PARTS

AK47 ARSENAL SAM 7K PISTOL UPGRADES

AR-15 PARTS, MUZZLE BRAKES & ACCESSORIES

AR-15, AR-10, & MINI14 MAGAZINES

AR10 PARTS, MAGS AND ACCESSORIES for (5/8x24) Threads

ATF APPROVED ARM BRACES, SHOCKWAVE BLADES, BUFFER TUBES & SIDE FOLDING ADAPTERS

BARREL THREADING OPTIONS FOR KEL TEC, PARTS & UPGRADES

BARREL THREADING, PINNING AND CROWNING, & RECEIVER THREADING SERVICES

BIPODS & BRASS CATCHERS

BOOKS, CONVERSION MANUALS, AND PROSPECTIVE FFL MANUALS

COBRAY 37MM FLARE LAUNCHERS & RAIL MOUNTS

COMPLIANT 10 ROUND MAGAZINES

CZ SKORPION 9MM UPGRADES AND ADAPTERS

DESERT EAGLE EXTRAS

FAKE SUPPRESSORS/FAKE SILENCERS

FOLDING ADAPTERS

GLOCK AND OTHER PISTOLS MAGAZINES & PARTS

GRIPS AND FOREGRIPS

GUN CASES & RANGE BAGS

GUNS FOR SALE

M-11 9MM SMG REPLACEMENT PARTS

M-11 9MM SMG UPGRADES

M-11 COBRAY SWD SEMI AUTO PARTS AND UPGRADES

M-12, M-11A1 SMG & SA .380 PARTS

MAC-10 SMG UPGRADES

MAC-10 SMG/OPEN BOLT REPLACEMENT PARTS

MAGAZINE POUCHES & BELTS

MAGAZINE SPEED LOADERS

MAGAZINE SPRINGS & MAGAZINE PARTS

MAGAZINES & DRUMS FOR .45 acp 1911 STYLE PISTOLS AND BERETTA 9MM

MAGAZINES & DRUMS FOR PPSh-41, M1 CARBINE, RUGER 10/22 & MSAR STG-556

MAGAZINES & DRUMS FOR STEN, MP44, SUOMI, & H & K

MAGAZINES FOR ALL M-11 Cobray SWD 9MM, SMG & SEMI AUTO

MAGAZINES FOR ALL MAC-10 .45 ACP SMG & SA, MASTERPIECE ARMS .45 ACP, VULCAN .45 ACP.

MAGAZINES FOR ALL MPA MASTERPIECE ARMS, STEN & VELOCITY 9MM PISTOLS & RIFLES

MAGAZINES FOR M11A1 .380 ACP & M12 .380 ACP

MAGAZINES FOR MAC-10 9MM SMG & SEMI AUTO

MAGAZINES, DRUMS, AND PARTS FOR FN/FAL, SKS, M1A/M14, & THOMPSON

MASTER PIECE ARMS All 9MM & MINI SERIES - REPLACEMENT PARTS

MASTER PIECE ARMS MPA22-T UPGRADES

MASTERPIECE ARMS .45 ACP, VULCAN/VELOCITY .45 ACP & MAC-10 SEMI AUTO PARTS and UPGRADES

MASTERPIECE ARMS ALL 9MM, MINI SERIES & 5.7x28mm SERIES - UPGRADES

MUZZLE BRAKES FOR .223, 5.56, & 9MM

REAR BUTTSTOCKS & REAR STOCKS

RED DOT SCOPES, LASERS, FLIP UP SIGHTS, & FLASHLIGHTS

SAIGA SHOTGUN PARTS, SAIGA 7.62X39, MAGS, DRUMS, & UPGRADES

SALE ITEMS

SHOTGUN UPGRADES-REMINGTON, & MOSSBURG

SIG SAUER MAGAZINES & PARTS

SLINGS, SLING LOOPS AND RAILS

SUPPRESSORS

T-SHIRTS & LICENSE PLATE FRAMES

TEC-9, TEC-22, KG 99 & AB-10, MAGAZINES & PARTS-SEMI AUTO & SMG

THREAD ADAPTERS

THREAD PROTECTORS

TOOLS & THREAD TAPS FOR M-11, MAC-10, MPA, AR-15, & AK-47

UZI, UZI .22 LR, HK, & MAGAZINES

WALTHER MAGAZINES, PARTS & AUCTIONS

Please research all ATF rules and regulations before purchasing any pistol rear stock adapters. IF YOU ARE PURCHASING A REAR STOCK ADAPTER FOR YOUR OPEN BOLT MAC-10, TELL US IN THE COMMENTS SECTION OF YOUR ORDER IF YOU HAVE AN OPEN BOLT MAC-10, WE NEED TO GIVE YOU A DIFFERENT BOLT AND INNER THREADED BLOCK.

*Single Point Rear Rail Mount with Sling Loop for Master Piece Arms .45 ACP

Details 

This adapter is easy to mount using a button head bolt and an Allen wrench that we provide. It secures to the rear stock threaded hole under the rear of the firearm and offers a polymer rail and a rail mounted sling loop for a one point sling or rear of a two point sling. The Rear Rail can be removed to use the adapter and mount a flat mount stock as well. Fits all Master Piece Arms .45ACP guns and rifles with a factory threaded hole.
Price: $85.99

*Skeleton Stock with Folding Adapter for Master Piece Arms .45 acp & M10 OB

Details 

This tactical skeleton stock is perfect if you want a different look in a light weight, slim package. It folds easily for compact storage. Includes our rear stock adapter, bolt, Allen wrench, slim folding adapter, skeleton stock (black) a thick rubber shoulder pad. (gun & other items sold separately) Fits MPA .45acp models only***TELL US IN THE COMMENTS SECTION OF YOUR ORDER IF YOU HAVE AN OPEN BOLT MAC-10, WE NEED TO GIVE YOU A DIFFERENT BOLT AND INNER THREADED BLOCK.**SKELETON STOCKS ON BACK ORDER STATUS**
Price: $249.98

*Spiked Muzzle Brake for Mac-10 .45 acp & Master Piece Arms .45 acp

Details 

Our new spiked muzzle brake for the Mac-10 & MPA .45 acp is made of machined steel and finished in black oxide for durability. It has six machined, slotted ports and its' crown works great for door breach situations, self defense and adds a custom appearance to any Mac-10 .45 acp Semi Auto, SMG and also MPA .45 acp short barreled guns. It is 3" inches in length and weighs only 5 ounces. It has a thread of 7/8x9. (gun & other parts sold separately)
Price: $39.99

3 Inch Slotted Muzzle Brake for Mac 10 9mm

Details 

This Steel machined MAC-10 9mm Muzzle forces the disbursement of gases out through 6 long, machined slotted ports to minimize recoil while increasing accuracy under fire. It is 4 inches in length and the same thickness as the exterior base of the barrel, so it matches up perfectly. Finished in black oxide. Thread is 3/4x10, FITS M-10 SEMI AUTO/SMG 9MM. **DOES NOT FIT MPA 930 MINI (Gun and other components not included)
Price: $39.99

AR Adapter & 6 Position Stock for MPA .45 acp

Details 

SAVE some money on both components and on shipping and buy this Mac-10 and MPA 10 &15 Semi Auto series rear stock combination! This is the perfect set up if you want the feel and length of a 6 position adjustable AR stock and the strength of our new fixed stock bracket. It bolts to your gun using the existing threaded hole on the rear underside of your gun . It will not wiggle out during fire and has a tight precision fit. The addition of the AR stock will greatly improve accuracy and shot grouping as it provides a firm shoulder rest and helps to balance the weapon. Upgrade your MAC today and save some money! Installation instructions & allen wrench included. This part number for semi auto only, see other categories for SMG components. NFA rules apply, Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers. (gun and other accessories sold separately) Length of adapter to the end of the extended stock is 11.5". Adapters are coated in flat black, shown in last photos.**TELL US IN THE COMMENTS SECTION OF YOUR ORDER IF YOU HAVE AN OPEN BOLT MAC-10, WE NEED TO GIVE YOU A DIFFERENT BOLT AND INNER THREADED BLOCK.
Price: $149.98

AR Stock Adapter & Ace Stock for MPA .45 acp

Details 

If you are looking for new tactical rear stock set up for your Mini, this is for you! This black aluminum stock is only 7-1/5" long and lightweight. Includes an extension tube, sling swivel, foam over tube, and a 1/2" recoil pad. The sling swivel can be relocated to any of four different locations. (photos shows it on lower rear) The stock has been machined a bit to fit with our rear stock adapter designed only for the MPA .45 acp series. This set up will not fit any other MPA guns. Includes rear stock adapter, bolt, and ACE rear stock ONLY. (gun & other parts sold separately)Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers. Allen wrench included.**TELL US IN THE COMMENTS SECTION OF YOUR ORDER IF YOU HAVE AN OPEN BOLT MAC-10, WE NEED TO GIVE YOU A DIFFERENT BOLT AND INNER THREADED BLOCK.
Price: $179.99

AR Stock Adapter for Mac-10 SA Open Bolt

Details 

This is the right component if you want the feel and comfort of an adjustable or fixed AR stock. It bolts to your gun and maintains a tight precision fit under rapid fire. The addition of the AR stock will greatly improve accuracy and shot grouping as it provides a firm shoulder rest and helps to balance the weapon. This part number is for the adapter for the Mac-10 Semi Auto Open Bolt only. You will need an AR rear stock to complete the setup. See other parts numbers for complete set up. (gun and other accessories sold separately) Installation instructions & allen wrench included. * NFA rules apply, Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers.
Price: $62.99

AR Stock Adapter for Master Piece Arms .45acp

Details 

NEW slimmer version! This is the right component if you want the feel and comfort of an adjustable AR stock. It bolts to your gun (bolt included) and maintains a tight precision fit under rapid fire. The addition of the AR stock will greatly improve accuracy and shot grouping as it provides a firm shoulder rest and helps to balance the weapon. This part number is for the adapter only, for MPA 10-15 models only, rear needed to complete the set up. See other options for complete set up. Easy installation. * NFA rules apply, Addition of this item may require additional paperwork to be filed with the ATF, check with your local dealers. Installation instructions included. (gun and other accessories sold separately)
Price: $59.99

Billet Stock with Folding Adapter for MPA .45 ACP

Details 

This is our newest rear stock design with folding adapter for MASTER PIECE ARMS .45 ACP guns. It offers a solid stock design and with the folding adapter & weighs just over 1.4 lb. with the folding adapter. It measures about 9.25" from the rear of the receiver. Finished in jet black anodize bolts up to the rear using existing threaded hole, button head bolt and Allen wrench & instructions included. Folding adapter can be switched to fold to the left or to the right. Fits Master Piece Arms .45 acp only. (gun & other parts sold separately)**TELL US IN THE COMMENTS SECTION OF YOUR ORDER IF YOU HAVE AN OPEN BOLT MAC-10, WE NEED TO GIVE YOU A DIFFERENT BOLT AND INNER THREADED BLOCK.
Price: $249.99

Blackout Barrel Extension for Semi Auto Mac-10 9mm

Details 

This machined 7 inch Barrel extension takes its looks from the Browning 1919 machine gun barrel. It is threaded for the Mac-10 9mm SMG and Semi Auto and provides more accuracy and gives your weapon a more tactical look. It also acts as a counter weight and aids to keep the muzzle down under rapid fire in both an SMG and Semi Auto.With 9 machined ports at the end, it acts as a muzzle break as well. Fits standard 3/4x10 threaded barrels for Mac-10 SMG, MPA 9mm, and Vulcan 9mm guns. It's a great upgrade that works well with our forward tactical grips. (gun & other parts sold separately)**NEW MATTE/FLAT BLACK FINISH-SHOWN IN LAST PHOTOS
Price: $59.99

EZ Mag Drop Lever for Master Piece Arms .45 acp & Mac10

Details 

Our NEW EZ magazine release lever for the Mac-10 & MPA .45 acp Semi Auto will save your thumbs and gain seconds on your competition during competitive events. CNC machined and finished in hard coat black anodize it will add to any custom gun. Fits Master Piece Arms 10 & 15 .45 acp series and Mac-10 .45acp. Installation instructions included. (gun & other components sold separately)
Price: $24.99

Fixed Low Mount Stock for Mac-10 Semi Auto Open Bolt

Details 

If you want a solid, light weight fixed, low mount stock for your Mac-10 Semi Auto Open bolt, then this is the stock for you! It offers a light weight fiber stock that sits low enough to use your iron sights. It mounts to the rear of your Mac-10 semi auto and uses a billet, threaded block on the inside of the receiver and a button head bolt underneath. we provide the bolt and the Allen wrench. Please call with questions on your application. Stock measures 10.25" from rear of receiver***BACK ORDER ONLY**
List Price: $74.99
Price: $68.99

« Previous | 1 | 2 | 3 | 4 | »